IPBX-2C20 Module | Commercial Audio-over-IP Solutions

IPBX-2C20

Support PoE+ and PoE power
Standard RJ45 interface, PCB control and Class-D amp board (2 x 20w).
Cost effective and simple installation with single cable deployment
Easily configured, controlled, managed, and monitored via web browser
Full DSP includes Ducker, AGC, PEQ, Hi/Low Pass, Compressor, Limiter, etc.
IP based for music streaming, routing, paging and control over LAN/WAN
VoIP call via SIP protocol
Supports audio codecs G.711u, G.711a, G.722, PCM16K and MP3
3 control inputs, 1 contact output
Internal storage (200mb) plus microSD card of up to 512GB available for message or music storage.

Description

These adaptable two channel (2 x 20w) IP speaker modules can convert a standard low impedance speaker, whether it is ceiling, cabinet, projector or horn, and make it IP addressable and powered via Ethernet (PoE). The IPSM-2C20 and IPBX-2C20 will also allow additional standard low impedance speakers to be connected to a single module, thus splitting the IP functionality cost across multiple speakers as opposed to one, providing that each speaker doesn’t need to be individually addressable. Integrated DSP tools for audio enhancement and memory storage are just two other features of the IPSM-2C20 and IPBX-2C20.

Key Technical Specification

I/Os:	3 control inputs, 1 contact outpu
Connectivity:	CAT5/6 cable connectivity for audio and control
Power:	PoE+ or 24 VDC power supply (if PoE is not available)
Supports:	G.711u, G.711a, G.722, PCM16K and MP3
Communication:	SIP / Multicast
Amplification:	Class D amp (2x20w)
Memory:	200mb internal plus micro SD card port (512GB max)