TERRA-G2 Network IP Decoder | Audio-Over-IP Solutions

TERRA-EX/G2

IP PoE audio decoder.
Use for paging, intercom, music streaming, audio routing, pre-recorded and scheduled announcements, VoIP communication or as a SIP device.
Receive digitised audio from a network and provide an analogue output with I/O or optional RS232 control.
Store messages, music or alerts on the 200mb internal memory. SD card port for additional 512GB storage.
Trigger messages, music or alerts with the integrated scheduler.
Integrate with 3rd party devices such as CCTV, door access and AV systems
Configured, controlled and monitored via web browser.

Description

The TERRA-EX/G2 can be paired with analogue amplification to offer a cost-effective solution for a public address system. It can be added to an existing traditional PA system or included as part of a new installation to provide functionalities such as school lockdown class/shift changes, paging, music/message storage, and streaming. Alternatively, distribute audio over a network between two buildings by sending it with the TERRA-IEX/G2 and receiving it with the TERRA-EX/G2. For all-call paging announcements, use the TERRA-K microphone; for multiple zones, choose the PPM-IT5.

Key Technical Specification

Inputs:	3 contact inputs and 1 contact output
Line outputs:	2 balanced line outputs (1 stereo or 2 mono)
Output:	1 stereo line output (3.5 mm mini-jack) for headphone
Audio output:	Maximum level +5 dB, bandwidth 20 Hz ˜ 20 kHz
Connectivity:	Single CAT5/6 cable connectivity for audio and control
Power:	PoE or 24 VDC power supply (if PoE is not available)
Supports:	G.711, G.722, G.726, G.727, G.729, MP3 audio codec and AAC+ (decoding only)
Communication:	SIP / Multicast
Storage:	200mb internal / SD card port (512GB)